HDMI Distribution Amplifier
VAC-2000UHD

Slide thumbnail
Slide thumbnail

Shipping Status: Available
  • Connector.

    Distribute to 2 outputs

    Distribute an HDMI source to 2 different sinks.

  • Connector.

    Supports up to 4K

    Supports resolutions up to 4K at 60 fps

  • Connector.

    HDCP 2.2 Supported

    Fully supports HDCP 2.2

The IDK VAC-2000UHD is a 4K@60 and HDCP 2.2 supported HDMI 2 distributions amplifier for video and audio. It distributes 4K@60 video signals having four times the resolution of full HD to 2 HDMI output connectors, which support HDCP 2.2. The VAC-2000UHD converts digital audio into analog audio and output them.

Input

Video
  • 1 Input
    • HDMI (*1) / DVI 1.0
    • TMDS single link
    • HDCP 1.4 / 2.2
    • HDR (*2)
    • 3D (*3)
    • x.v. Color
    • DDC2B (Selectable from built-in EDID / EDID copied from the monitor / EDID of the destination
      • If built-in EDID selected, the maximum resolution is selectable
    • Connectors: female HDMI Type A (19-pin)
  • VGA to 4K (*4)
  • 480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K (*4)
  • Color depth: 24 bit, 30 bit, 36 bit deep color (*5)
  • Dot clock: 25 MHz to 600 MHz
  • TMDS clock: 25 MHz to 300 MHz
  • TMDS data rate: 0.75 Gbps to 18 Gbps
Audio
  • 1 Input
    • Multi-channel linear PCM up to 8 channels
    • Sampling frequency: 32 kHz to 192 kHz
    • Sample size: 16 bit to 24 bit
    • Reference level: -20 dBFS
    • Max input level: 0 dBFS
    • Connectors: female HDMI Type A (19-pin)

Output

Video
  • 2 Outputs
    • HDMI (*1) / DVI 1.0
    • TMDS single link
    • HDCP 1.4 / 2.2
    • HDR (*2)
    • 3D (*3)
    • x.v. Color
    • Connector: female HDMI Type A (19-pin)
  • VGA to 4K (*4)
  • 480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K (*4)
  • Color depth: 24 bit, 30 bit, 36 bit deep color (*5)
  • Dot clock: 25 MHz to 600 MHz
  • TMDS clock: 25 MHz to 300 MHz
  • TMDS data rate: 0.75 Gbps to 18 Gbps
Audio
  • 2 Outputs
    • Multi-channel linear PCM up to 8 channels
    • Sampling frequency: 32 kHz to 192 kHz
    • Sample size: 16 bit to 24 bit
    • Connector: female HDMI Type A (19-pin)
  • 1 Output
    • Stereo LR unbalanced signal (*7)
    • Output impedance: 75 Ω
    • Reference level: -10 dBu
    • Max output level: +10 dBu
    • Connector: RCA pin jack

Other Info

MISC
  • Digital Input: 1080p@60: 131.2 ft. (40 m) / 4K@60: 39.4 ft. (12 m) (*8)
  • Digital Output: 1080p@60: 131.2 ft. (40 m) / 4K@60: 39.4 ft. (12 m) (*8)
  • Anti-snow (*9)
  • Audio A/D and D/A conversion
  • DDC buffer
  • 7 segment LED input/output signal status
  • Connection Reset (*10)
  • Key lock
  • Power: 100-240 VAC ± 10%, 50Hz/60Hz ± 3Hz
  • Power consumption: About 8 Watts
  • Dimensions: 8.27″ x 1.73″ x 7.87″ / 210 mm (W) x 44 mm (H) x 200 mm (D)
  • Rack size: 1/2U (not including projections)
  • Weight: 3.31 lbs / 1.5kg
  • Temperature
    • Operating: 32° F to 104° F / 0° C to +40° C
    • Storage: -4° F to +176° F / -20° C to +80° C
  • Humidity: Operating / Storage 20% to 90% (non-condensing)
  • (*1) ARC and HEC are not supported. CEC: Pass through between IN and OUT1
  • (*2) HDR will be supported when you connect HDR supported corresponding sink device and select external EDID setting, or when you copy EDID of HDR supported sink device by selecting EDID copy setting. If the unit supports HRD, all output signals from the unit are HDR supported signals.
  • (*3) 3D will be supported when you connect 3D supported corresponding sink device and select external EDID setting, or when you copy EDID of 3D supported sink device by selecting EDID copy setting. If the unit supports 3D, all output signals from the unit are 3D supported signals.
  • (*4) 4K format: 24 Hz / 25 Hz / 30 Hz / 50 Hz (4:4:4) / 59.94 Hz (4:4:4) / 60 Hz (4:4:4) are supported.
  • (*5) 4K format: following color depth are supported.
    • 24 Hz / 25 Hz / 30 Hz: 24 bit, 30 bit, 36 bit (RGB, YCbCr 4:4:4, YCbCr 4:2:2)
    • 50 Hz / 59.94 Hz / 60 Hz : 24 bit, 30 bit, 36 bit (YCbCr 4:2:2, YCbCr 4:2:0) : 24 bit (RGB, YCbCr 4:4:4)
  • (*6) Audio input is switch selectable between digital embedded audio and analog audio.
  • (*7) Analog audio output supports only 2 channel linear PCM.
  • (*8) The maximum cable distance varies depending on the connected devices and was measured under following conditions:
    • 1080p@60: when IDK’s AWG24 cable was used and signals of 1080p@60 24 bit / pixel (8 bit / component) was input or output.
    • 4K@60 : when IDK’s 18 Gbps supported cable was used and signals of 4K@60 24 bit / pixel (8 bit / component) was input or output. The maximum cable distance depends on the connected devices. The distance may not be extended with some device combinations, cabling method, or other manufacturer’s cable. Video may be disturbed or may not be output even if signals are within the range mentioned above.
  • (*9) The anti-snow feature automatically fixes snow noise that is a specific symptom of HDCP-compliant signals and mainly occurs at start-up. This feature does not work when snow noise has already occurred during startup or when it occurs due to a bad condition of the transmission line.
  • (*10) For digital systems, some problems, such as an HDCP authentication error, can often be recovered by physically disconnecting and reconnecting the digital cables. However, the Connection Reset feature will fix these problems automatically without the need to physically plug and unplug the cables. It creates the same condition as if the cable were physically disconnected and reconnected. This feature only works for the VAC’s output. If other devices are connected between the VAC’s output and sink device, this feature may be invalid.
Coming Soon