HDMI Fiber Optic Receiver
OPF-RH1000-A
Shipping Status: Available
- Connector.
1080p / WUXGA Supported
Resolution up to 1080p / WUXGA (RB)
- Connector.
Long range Fiber
984 ft. / 300 m on multimode fiber, 6.21 mi. / 10 km over singlemode fiber
- Connector.
Analog Audio & RS-232
Extends Analog Audio and RS-232 signals over fiber
The IDK OPF-H1000 is transmitter and receiver set for a long-haul transmissions of HDMI signals over a fiber optic cable. The input signals are transmitted pass through and without compression so that the image quality can be kept.
RS-232C serial bidirectional communication and analog audio transmissions are also supported.
Daisy Chain models are also available.
Input
Video
- 1 Input
- Optical signal for extension
- Connector: 2 LC connector
- VGA / SVGA / XGA / WXGA (1280 x 768) / WXGA (1280 x 800) / Quad-VGA / SXGA / WXGA (1360 x 768) / WXGA (1366 x 768) / SXGA+ / WXGA+ / WXGA++ / UXGA / WSXGA+ / WUXGA
- WUXGA only supports DVI signal and Reduced Blanking
- 480i / 480p / 576i / 576p / 720p / 1080i / 1080p
- Color depth: 24 bit (*3)
- Dot clock: 25 MHz to 165 MHz
- TMDS clock: 25 MHz to 165 MHz
Audio
- 1 Input
- Optical signal for extension
- Connector: 2 LC connector
- 1 Input
- Optical signal for extension
- Connector: 2 LC connector
Output
Video
- 1 Output
- HDMI (*1)
- HDCP1.4 (Pass through)
- CEC (Pass through)
- TMDS single link
- Connector: Female HDMI Type A (19-pin) (*2)
- VGA / SVGA / XGA / WXGA (1280 x 768) / WXGA (1280 x 800) / Quad-VGA / SXGA / WXGA (1360 x 768) / WXGA (1366 x 768) / SXGA+ / WXGA+ / WXGA++ / UXGA / WSXGA+ / WUXGA
- WUXGA only supports DVI signal and output as Reduced Blanking
- 480i / 480p / 576i / 576p / 720p / 1080i / 1080p
- Color depth: 24 bit (*3)
- Dot clock: 25 MHz to 165 MHz
- TMDS clock: 25 MHz to 165 MHz
Audio
- 1 Output
- Multi-channel linear PCM up to 8 channels
- Sampling frequency: 32 kHz to 192 kHz
- Sample size: 16 bit to 24 bit
- Reference level:-20 dBFS
- Max. input level: 0 dBFS
- Connector: Female HDMI Type A (19-pin) (*2)
- 1 Output
- Stereo LR unbalanced signal
- Input impedance: 75 Ω
- Reference level: -10 dBu
- Max. input level: +3 dBu
- Connector: Stereo mini jack (3.5 mm)
MISC
Function
- DDC2B (EDID is copied from a connected monitor automatically)
Fiber optic cable
- Duplex fiber cable, SFP module (2 LC connectors)
- SFP for Multimode: PC (recommended)
- SFP for Singlemode: UPC (recommended), SPC supported
- APC is not supported
- Multimode fiber (OM3): 985 ft. (approx.) / 300 m
- Multimode fiber (OM4): 3,280 ft. (approx.) / 1 km
- Singlemode fiber (OS1): 2.92 miles (approx.) / 4.7 km
- Singlemode fiber (OS1): 6.1 miles (approx.) / 10 km
Control
- 1 port
- Full duplex up to 115.2kbps
- Connector: male D-Sub (9-pin)
Other Info
- Power
- Input: 100 – 240 VAC ± 10%, 50 Hz/60 Hz ± 3 Hz
- Output: 5VDC 3A 15Watt (AC adapter is supplied)
- Power consumption: About 4 Watts
- Dimensions: 4.17 × 1.18 × 3.54″ (approx.) / 106 (W) × 30 (H) × 90 (D) mm (Quarter rack, not including projections)
- Weight: 0.88 lbs. (approx.) / 0.4 kg
- Temperature
- Operating: 32° F to 104° F / 0° C to +40° C
- Storage: -4° F to +176° F / -20° C to +80° C
- Humidity
- Operating / Storage: 20% to 90% (non-condensing)
- (*1) HEC and ARC are not supported.
- (*2) Please use an HDMI cable shorter than 5 meters.
- (*3) Deep Color is not supported.
- (*4) Separate analog audio input cannot be embedded onto digital video
- (*5) Analog audio cannot be de-embedded (de- multiplexed) from digital audio.
- (*6) It is possible to connect without using the recommended polishing method, but that may cause a change of extension distance ability due to an increase in return loss.
- (*7) Max. Extension distance is measured under following condition; using fiber of recommended polishing method, without connection at the transmission path and not exceeding the value of allowable bending radius.
Coming Soon