HDMI Fiber Optic Transmitter
OPF-TH1000D

Slide thumbnail
Slide thumbnail
Slide thumbnail

Shipping Status: Available
  • Connector.

    1080p / WUXGA Supported

    Resolution up to 1080p / WUXGA (RB)

  • Connector.

    Long range Fiber

    984 ft. / 300 m on multimode fiber, 6.21 mi. / 10 km over singlemode fiber

  • Connector.

    Daisy Chain via single fiber

    Daisy chain connection is available at receiver up to 7 units

The IDK OPF-1000D Fiber Optic Extender is an extender for long haul transmission of HDCP-compliant HDMI video, and unidirectional RS-232 control signals over fiber optic cabling. And it also supports Daisy Chain.

Input signals are extended without quality lessening as they are extended without compression. Audio can be audio de-embedded from HDMI signal and output as analog audio at transmitter side.

Input

Video
  • 1 Input
    • HDMI (*1) / DVI
    • HDCP1.4
    • TMDS single link
    • Connector: Female HDMI Type A (19-pin) (*2)
  • VGA / SVGA / XGA / WXGA (1280 x 768) / WXGA (1280 x 800) / Quad-VGA / SXGA / WXGA (1360 x 768) / WXGA (1366 x 768) / SXGA+ / WXGA+ / WXGA++ / UXGA / WSXGA+ / WUXGA
    • WUXGA only supports Reduced Blanking
  • 480i / 480p / 576i / 576p / 720p / 1080i / 1080p
  • Color depth: 24 bit (*3)
  • Dot clock: 25 MHz to 165 MHz
  • TMDS clock: 25 MHz to 165 MHz
Audio
  • 1 Input
    • Multi-channel linear PCM up to 8 channels
    • Sampling frequency: 32 kHz to 192 kHz
    • Sample size: 16 bit to 24 bit
    • Reference level:-20 dBFS
    • Max. input level: 0 dBFS
    • Connector: Female HDMI Type A (19-pin) (*2)
  • 1 Input
    • Stereo LR unbalanced signal
    • Input impedance: 75 Ω
    • Reference level: -10 dBu
    • Max. input level: +3 dBu
    • Connector: RCA

Output

Video
  • 1 Output
    • Optical signal for extension
    • Connector:  LC connector
  • VGA / SVGA / XGA / WXGA (1280 x 768) / WXGA (1280 x 800) / Quad-VGA / SXGA / WXGA (1360 x 768) / WXGA (1366 x 768) / SXGA+ / WXGA+ / WXGA++ / UXGA / WSXGA+ / WUXGA
    • WUXGA only output as Reduced Blanking
  • 480i / 480p / 576i / 576p / 720p / 1080i / 1080p
  • Color depth: 24 bit (*3)
  • Dot clock: 25 MHz to 165 MHz
  • TMDS clock: 25 MHz to 165 MHz
Audio
  • 1 Output
    • Optical signal for extension
    • Connector: LC connector
  • 1 Output
    • Optical signal for extension
    • Connector: LC connector

MISC

Function
  • DDC2B (EDID is copied from a connected monitor automatically)
    • Internal EDID data can select maximum resolution
Fiber optic cable
  • Simplex fiber cable, SFP module (2 LC connectors)
  • SFP for Multimode: PC (recommended)
  • SFP for Singlemode: UPC (recommended), SPC supported
    • APC is not supported
  • Multimode fiber (OM3): 985 ft. (approx.) / 300 m
  • Multimode fiber (OM4): 3,280 ft. (approx.) / 1 km
  • Singlemode fiber (OS1): 2.92 miles (approx.) / 4.7 km
  • Singlemode fiber (OS1): 6.1 miles (approx.) / 10 km (Option)
Control
  • 1 port
    • Full duplex up to 115.2kbps
    • Connector: male D-Sub (9-pin)
Other Info
  • Power
    • Input: 100 – 240 VAC ± 10%, 50 Hz/60 Hz ± 3 Hz
    • Output: 5VDC 3A 15Watt (AC adapter is supplied)
  • Power consumption: About 9 Watts
  • Dimensions: 4.17 × 1.10 × 7.87″ (approx.) / 106 (W) × 28 (H) × 200 (D) mm (Quarter rack, not including projections)
  • Weight: 1.32 lbs. (approx.) / 0.6 kg
  • Temperature
    • Operating: 32° F to 104° F / 0° C to +40° C
    • Storage: -4° F to +176° F / -20° C to +80° C
  • Humidity
    • Operating / Storage: 20% to 90% (non-condensing)
  • (*1) CEC, HEC and ARC are not supported.
  • (*2) Please use an HDMI cable shorter than 5 meters.
  • (*3) Deep Color is not supported.
  • (*4) It is possible to connect without using the recommended polishing method, but that may cause a change of extension distance ability due to an increase in return loss.
  • (*5) Max. Extension distance is measured under following condition; using fiber of recommended polishing method, without connection at the transmission path and not exceeding the value of allowable bending radius.
Coming Soon