HDBaseT Receiver
HDC-RH100-D

Slide thumbnail
Slide thumbnail
Slide thumbnail

Shipping Status: Available
  • Connector.

    4K UHD at 60Hz

    Supports resolutions up to 4K at 60 frames per second

  • Connector.

    Extend to 330ft / 100m

    Pair with IDK HDBaseT receivers to extend up to 333ft / 100m

  • Connector.

    RS-232 and LAN

    Also supports extending bidirectional RS-232 and LAN communication

The IDK HDC-H100-D is an extender for HDBaseT signals using a single twisted pair cable to transmit data over a long distance. The product supports 4K/60Hz video signals, extending them digitally end-to-end. Bidirectional RS–232 and LAN communication are also supported.

Input

Video
  • 1 Input
    • HDBaseT
    • Connector: RJ-45
  • VGA to 4K (*4)
  • 480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K (*4)
  • Color depth: 24 bit, 30 bit, 36 bit Deep Color (*5)
  • Dot clock: 25 MHz to 600 MHz
  • TMDS clock: 25 MHz to 340 MHz
  • TMDS data rate: 0.75 Gpbs to 10.2 Gpbs
  • Plug&Play: Pass through
Audio
  • 1 Input
    • Multi-channel linear PCM up to 8 channels
    • Sampling frequency: 32 kHz to 192 kHz
    • Sample size: 16 bit to 24 bit
    • Connector: Female HDMI Type A (19-pin) (*3)

Output

Video
  • 1 Output
    • HDMI (*1) / DVI 1.0
    • HDCP1.4 / 2.2 (Pass through)(*2)
    • TMDS single link
    • CEC (Pass through)
    • Connector: Female HDMI Type A (19-pin) (*3)
  • VGA to 4K (*4)
  • 480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K (*4)
  • Color depth: 24 bit, 30 bit, 36 bit Deep Color (*5)
  • Dot clock: 25 MHz to 600 MHz
  • TMDS clock: 25 MHz to 340 MHz
  • TMDS data rate: 0.75 Gpbs to 10.2 Gpbs
  • Plug&Play: Pass through
Audio
  • 1 Output
    • Multi-channel linear PCM up to 8 channels
    • Sampling frequency: 32 kHz to 192 kHz
    • Sample size: 16 bit to 24 bit
    • Connector: Female HDMI Type A (19-pin) (*3)

MISC

Cat Cable
  • Cat5e UTP / STP, Cat6 UTP / STP, CAT.5E HDC cable
  • 328 ft. / 100 m (For 4K format, CAT.5E HDC, Cat5e STP, or Cat6 STP cable is used)
  • 492 ft. / 150 m (Long reach mode is used with IDK HDBaseT receivers)
Other Info
  • Serial control port
    • Full duplex with max 115.2 kbps data rate
    • Connector: male 9-pin D-Sub,
  • LAN control port
    • 10Base-T (Auto neg.), 100Base-TX (Auto neg.), Auto MDI/MDI-X
    • Connector: RJ-45
  • Power
    • AC adapter
      • Input: 100-240 VAC ± 10 %, 50 Hz / 60 Hz ± 3 Hz
      • Output: 5 VDC 3 A (A dedicated AC adapter is provided)
  • Power consumption
    • About 7 Watts
  • Dimensions: 4.2 (W) × 1.1 (H) × 3.9 (D)” (106 (W) × 27.5 (H) × 100 (D) mm) (Excluding connectors and the like)
  • Weight: 0.4 lbs. / 0.2 kg
  • Temperature
    • Operating: 32° F to 104° F / 0° C to +40° C
    • Storage: -4° F to +176° F / -20° C to +80° C
  • Humidity
    • Operating / Storage: 20% to 90% (non-condensing)
  • (*1) ARC and HEC are not supported.
  • (*2) To transmit those signals, use an IDK’s twisted pair cable extender supporting DVI signals. If DVI signals with HDCP is sent from the source device, video may not be output to the sink device. please check the operation beforehand.
  • (*3) Use 16 ft. (5 m) or shorter HDMI cables. For 4K format, use an 18-Gbps high speed cable.
  • (*4) For 4K format, 24 Hz / 25 Hz / 30 Hz / 50 Hz (4:2:0) / 60 Hz (4:2:0) are supported.
  • (*5) For 4K format, the following color depths are supported.
    • 24 Hz / 25 Hz / 30 Hz
      • 24 bit (RGB, YCbCr 4:4:4)
      • 24 bit, 30 bit, 36 bit (YCbCr 4:2:2)
    • 50 Hz / 59.94 Hz / 60 Hz
      • 24 bit (YCbCr 4:2:0)
  • (*6) T568A or T568B straight. The CAT.5E HDC cable is developed by IDK and recommended by HDBaseT alliance.
  • (*7) The maximum extension distance was obtained when IDK’s CAT.5E HDC cable was used. The distance may not be extended with some device combinations, cabling method, or other manufacturer’s cable. Video may be disturbed or may not be output even if signals are within the range mentioned above. Operations may not be stable with some LCD devices; please check the operation beforehand or contact us. The maximum extension distance is the shorter distance of connected HDBaseT product or sink device’s maximum extension distance. For Long reach mode, use IDK’s twisted pair cable products that supports 328 ft. (100 m), and up to resolutions 1080p (24 bit) or less are supported.
coming soon