HDBaseT Wall Plate Transmitter
HDC-TH100WP

Slide thumbnail
Slide thumbnail
Slide thumbnail

  • Connector.

    4K@60 & HDCP1.4/2.2

    Supports resolutions up to 4K@60 4:2:0 & HDCP2.2/1.4

  • Connector.

    EXTEND TO 330 FT. / 100 M

    Pair with IDK HDBaseT receivers to extend up to 328 ft. / 100 m, or 492 ft. / 150 m using Long Reach Mode

  • Connector.

    RS-232 AND LAN

    Supports extending bidirectional RS-232 and LAN communication

  • Connector.

    No substantive extension delay

    10 μs or less per 328 ft. / 100 m

The IDK HDC-TH100WP is a wall-mountable transmitter for a long-haul transmission of HDMI signal over one single twisted pair cable.
The image quality will not be deteriorated, since video signal is transmitted at a resolution up to 4K@60 without compression.
Input video signal is converted to HDBaseT signal and sent up to 328 ft. (100 m).
PoH (Power over HDBaseT) is supported. Connecting a receiver supporting PoH power supply (PSE) function eliminates the need for a local power supply.

Input

Video
  • 1 Input
    • HDMI (*1) / DVI 1.0
    • HDCP1.4 / 2.2 (Pass through)(*2)
    • TMDS single link
    • CEC (Pass through)
    • Connector: Female HDMI Type A (19-pin) (*3)
  • VGA to 4K (*4)
  • 480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K (*4)
  • Color depth: 24 bit, 30 bit, 36 bit Deep Color (*5)
  • Dot clock: 25 MHz to 600 MHz
  • TMDS clock: 25 MHz to 340 MHz
  • TMDS data rate: 0.75 Gpbs to 10.2 Gpbs
  • Plug&Play: Pass through
Audio
  • 1 Input
    • Multi-channel linear PCM up to 8 channels
    • Sampling frequency: 32 kHz to 192 kHz
    • Sample size: 16 bit to 24 bit
    • Connector: Female HDMI Type A (19-pin) (*3)

Output

Video
  • 1 Output
    • HDBaseT
    • PoH power supplied (PD) (equivalent to IEEE802.3af)
    • Connector: RJ-45
  • VGA to 4K (*4)
  • 480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K (*4)
  • Color depth: 24 bit, 30 bit, 36 bit Deep Color (*5)
  • Dot clock: 25 MHz to 600 MHz
  • TMDS clock: 25 MHz to 340 MHz
  • TMDS data rate: 0.75 Gpbs to 10.2 Gpbs
  • Plug&Play: Pass through
Audio
  • 1 Output
    • Multi-channel linear PCM up to 8 channels
    • Sampling frequency: 32 kHz to 192 kHz
    • Sample size: 16 bit to 24 bit
    • Connector: Female HDMI Type A (19-pin) (*3)

MISC

Cat Cable
  • Cat5e UTP / STP, Cat6 UTP / STP, CAT.5E HDC cable
  • 328 ft. / 100 m (For 4K format, CAT.5E HDC, Cat5e STP, or Cat6 STP cable is used)
  • 492 ft. / 150 m (Long reach mode is used with IDK HDBaseT receivers)
Other Info
  • Power
    • PoH power supplied (PD) (equivalent to IEEE 802.3af) (*8), Connector: RJ-45
    • DC 12 V 0.2 A, Connector: 2-pin terminal block (*9)
  • Power consumption
    • PoH power supplied (PD): About 4 Watts
    • DC 12 V power supplied: About 3 Watts
  • Dimensions: 1.7 (W) × 4.2 (H) × 3.1 (D)” (43.2 (W) × 106.8 (H) × 78.9 (D) mm) (Excluding connectors and the like)
  • Weight: 0.4 lbs. / 0.2 kg
  • Temperature
    • Operating: 32° F to 104° F / 0° C to +40° C
    • Storage: -4° F to +176° F / -20° C to +80° C
  • Humidity
    • Operating / Storage: 20% to 90% (non-condensing)
  • Switch Box
    • Eaton’s Crouse-Hinds TP218 1-Gang Steel Switch Box, 2-1/2 in. Deep (*10)
    • Eaton’s Crouse-Hinds TP252 1-Gang Steel Switch Box, 3-1/2 in. Deep
  • Mounting Bracket
    • Arlington Industries LV1 Low Voltage Mounting Bracket
  • Wallplate
    • Leviton Manufacturing 80401-W 1-Gang Decora Wallplate
  • (*1) ARC and HEC are not supported.
  • (*2) To transmit those signals, use an IDK’s twisted pair cable extender supporting DVI signals. If DVI signals with HDCP is sent from the source device, video may not be output to the sink device. please check the operation beforehand.
  • (*3) Use 16 ft. (5 m) or shorter HDMI cables. For 4K format, use an 18-Gbps high speed cable.
  • (*4) For 4K format, 24 Hz / 25 Hz / 30 Hz / 50 Hz (4:2:0) / 60 Hz (4:2:0) are supported.
  • (*5) For 4K format, the following color depths are supported.
    • 24 Hz / 25 Hz / 30 Hz
      • 24 bit (RGB, YCbCr 4:4:4)
      • 24 bit, 30 bit, 36 bit (YCbCr 4:2:2)
    • 50 Hz / 59.94 Hz / 60 Hz
      • 24 bit (YCbCr 4:2:0)
  • (*6) T568A or T568B straight. The CAT.5E HDC cable is developed by IDK and recommended by HDBaseT alliance.
  • (*7) The maximum extension distance was obtained when IDK’s CAT.5E HDC cable was used. The distance may not be extended with some device combinations, cabling method, or other manufacturer’s cable. Video may be disturbed or may not be output even if signals are within the range mentioned above. Operations may not be stable with some LCD devices; please check the operation beforehand or contact us. The maximum extension distance is the shorter distance of connected HDBaseT product or sink device’s maximum extension distance. For Long reach mode, use IDK’s twisted pair cable products that supports 328 ft. (100 m), and up to resolutions 1080p (24 bit) or less are supported.
  • (*8) For receiving power, please use a twisted pair cable receiver that supports PoH power supply (IEEE 802.3af) or PoH injector. For providing power, use an AWG 24 or thicker twisted pair cable.
  • (*9) PoH (powered) cannot be used together with DC 12 V power supply.
  • (*10) Wall: 0.5 in. (1.27 cm) or thicker
Coming Soon