HDC-TH200 HDBaseT Extender

HDC-TH200 HDBaseT Extender
  • Connector.

    Analog / Digital

    Automatically switch between analog and digital video.

  • Connector.

    QXGA / 1080p

    Supports resolutions up to 1080p

  • Connector.

    Extend to 333ft / 100m

    Pair with IDK HDBaseT receivers to extend up to 333ft / 100m

IDK’s HDC-TH200 is an HDBaseT transmitter that features both analog and digital (including HDMI) video and audio signals. The unit also acts as a simple switcher, automatically sensing—and switching to—an active input. Up to 33 feet of input cable length can be equalised, and the HDC-TH200 can also embed the analog video into the digital stream. Additional features include saving of the last used configuration, anti-snow technology, a connection reset and a locking power supply. Pair with any of IDK’s HDBaseT receivers for video and audio extension to 100 meters/333 feet.

Input

Video
  • 1 Input / HDMI Deep Color (*1) / DVI 1.0
    • HDCP 1.4
    • CEC (Pass through)
    • TMDS single link, TMDS clock: 25 MHz to 225 MHz
    • Dot clock: 25 MHz to 165 MHz
  • Connectors: 1x female HDMI Type A
  • Built-in digital cable equalizer & EDID emulation

  • 1 input / Composite video, S-Video, Analog RGB / Analog YPbPr (auto-recognition)
    • Composite Video (VBS Signal): 1.0V[p-p]/75 Ω
    • S-Video (Y/C Signal): 1.0V [p-p] (Y) / 0.286V [p-p] (C) / 75 Ω
    • Analog RGB: 0.7V [p-p] (1.0V [p-p] Sync on Green) / 75 Ω HS/VS TTL level, CS TTL level, Sync on Green
    • Analog YPbPr: 1.0V [p-p] (Y) /0.7V [p-p] (Pb/Pr) / 75 Ω
  • Connectors: 1x female 15-pin HD
  • EDID emulation

  • 80i, 480p, 576i, 576p, 720p, 1080i, 1080p
  • VESA: Dot clock 25MHz to 165MHz (VGA to QWXGA)
    • WUXGA / QWXGA supported only with reduced blanking

Audio
  • 1 Input / Multi-channel linear PCM up to 8 channels
    • Sampling frequency: 32 kHz to 192 kHz
    • Sample size: 16 bit to 24 bit
    • Reference level: -10 dBFS
    • Max input level: 0 dBFS
  • Connectors: 1x female HDMI Type A

  • 1 Input / Stereo L/R unbalanced signal
    • Input impedance: 24 kΩ
    • Reference level: -10 dBu
    • Max input level: +10 dBu
  • Connectors: 1x stereo mini jack 3.5mm

Output

Video
  • 1 Output / HDBaseT
  • Connector: 1x RJ-45
    • Cable: Cat5e/Cat6 (STP/UTP straight cable)

Audio
  • 1 Output / Multi-channel linear PCM up to 8 channels
    • Sampling frequency: 32 kHz to 192 kHz
    • Sample size: 16 bit to 24 bit
    • Reference level: -20 dBFS
    • Max output level: 0 dBFS
  • Connector: 1x RJ-45

Other Info

Misc
  • Input:
    • HDMI / DVI: From ~33 ft. (10m) up to ~99 ft. (30m) (*5)
  • Output:
    • HDBaseT: Up to ~330 ft. (100m) (*6)

  • Last memory
  • Anti-snow
  • Connection reset
  • Front panel security lockout
  • Auto input detection and switching

  • LAN control port
    • 1x RJ-45 10Base-T (Auto neg.), 100Base-TX (Auto neg.), Auto MDI/MDI-X

  • Power input: 100-240 VAC ± 10%, 50Hz/60Hz ± 3Hz
  • Output: 12 VDC 3A (AC adapter is supplied)
  • Power consumption: TBD
  • Dimensions: TBD
  • Weight: TBD
  • Temperature
    • Operating: 32° F to 104° F / 0° C to +40° C
    • Storage: -4° F to +176° F / -20° C to +80° C
    • Humidity: Operating / Storage 20% to 90% (non-condensing)

HDC-TH200 Connection Diagram