IP-NINJAR Transmitter
NJR-T01SDI

Slide thumbnail
Slide thumbnail

  • Connector.

    SD/HD/3G-SDI Input

    SDI signal is converted to HDMI signal without frame delay.

  • Connector.

    SDI & HDMI Local Output

    HDMI local outputs are available for monitoring input signals.

  • Connector.

    Zero Frame Latency

    Transport video signals over IP with zero frame latency

The IDK NJR-T01SDI is an SDI network transmitter that enables a long-haul transmission of SDI input signal over a fiber optic cable.
The NJR-T01SDIRS-232C supports bidirectional communication and LAN transmission.
The NJR-T01SDI can be used with other IP-NINJAR products.*

*Please use this product with a combination of IP-NINJAR series products. It cannot be connected to OPF series or FDX.

Input

Video
  • 1 Input
    • SMPTE259M-C (SD-SDI) / SMPTE292M (HD-SDI) / SMPTE424M (3G-SDI)
    • 0.8 V [p-p] / 75 Ω
    • Connector: Female BNC
  • 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Audio
  • 1 Input
    • Multi-channel linear PCM up to 8 channels
      • two GROUPs can be selected from GROUP1 to 4
    • Sampling frequency: 48 kHz
    • Sample bit: 16 bit to 24 bit
    • Reference level: -20 dBFS
    • Max input level: 0 dBFS
    • Connectors: Female BNC
  • 1 Input
    • Stereo LR balanced / unbalanced signal
    • Input impedance: 48 kΩ balanced / 24 kΩ unbalanced
    • Reference level: -10 dBu
    • Max input level: +10 dBu
    • Connector: Terminal block (5-pin)

Output

Video
  • 1 Output
    • Connector:  LC (duplex fiber)
  • 1 Output * for monitoring input signals
    • HDMI / DVI 1.0
    • TMDS single link
    • Connector: Female HDMI Type A (19-pin)
  • 1 Output * for monitoring input signals
    • SMPTE259M-C (SD-SDI) / SMPTE292M (HD-SDI) / SMPTE424M (3G-SDI)
    • 0.8 V [p-p] / 75 Ω
    • Connector: Female BNC
  • 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Audio
  • 1 Output
    • Digital Audio
      • Multi-channel linear PCM up to 8 channels
        • two GROUPs can be selected from GROUP1 to 4
      • Sampling frequency: 48 kHz
      • Sample bit: 16 bit to 24 bit
      • Reference level: -20 dBFS
      • Max input level: 0 dBFS
    • Analog Auido
      • Stereo LR balanced / unbalanced signal
      • Output impedance: 100 Ω balanced / 50 Ω unbalanced
      • Reference level: -10 dBu
      • Max output level: +10 dBu
    • Connector: LC (duplex fiber)
  • 1 Output
    • Stereo LR balanced / unbalanced signal
    • Output impedance: 100 Ω balanced / 50 Ω unbalanced
    • Reference level: -10 dBu
    • Max output level: +10 dBu
    • Connector: Terminal block (5-pin)

Misc

Fiber Optic Cable
  • Duplex fiber cable, SFP+ module (2 LC connectors)
  • SFP+ for Multimode: PC (recommended)
  • SFP+ for Singlemode: UPC (recommended), SPC supported, APC is NOT supported
  • Multimode fiber (OM3): up to 984 ft. / 300 m
  • Singlemode fiber (OS1): up to 6.21 miles / 10 km
  • Singlemode fiber (OS1): up to 24.85 miles / 40 km (optional)
External Control
  • 1 Port (full duplex up to 115.2kbps)
  • Connector: Male D-Sub (9-pin)
  • 1 Port
  •  10Base-T, 100Base-TX , 1000Base-TX (Auto neg.), Auto MDI/MDI-X
  • Connector: RJ-45
Other Info
  • AC adapter
    • Input: 100-240 VAC ± 10 %, 50 Hz / 60 Hz ± 3 Hz
    • Output: 12 VDC 3 A (A dedicated AC adapter is provided)
  • Power consumption: TBD
  • Dimensions: 8.3″ x 1.7″ x 5.5″ / 210 mm (W) x 44 mm (H) x 140 mm (D)
  • Rack size: EIA half rack wide, 1U high
  • Weight: TBD
  • Temperature
    • Operating: 32 °F to 104 °F / 0 °C to +40 °C
    • Storage: -4 °F to +176 °F / -20 °C to +80 °C
    • Humidity: Operating / Storage 20 % to 90 % (non-condensing)
IP-NINJAR_Diagram