IP-NINJAR Transmitter
NJR-T01UHD

Slide thumbnail
Slide thumbnail

  • Connector.

    4K@60 (4:4:4) SWITCHING AND EXTENSION

    Switch and extend 4K@60 (4:4:4) over 10GbE networks

  • Connector.

    MULTIVIEWER AND VIDEOWALL

    Quickly and easily create Multiviewers and Videowalls

  • Connector.

    Zero Frame Latency

    Transport video signals over IP with zero frame latency

The IDK NJR-01UHD is an over IP solution for high definition signal extension via fiber optic cables or twisted pair cables. This 4K solution leverages 10 Gb Ethernet switches and enables signal management of 4K@ 60 (4:4:4) signals with zero latency. RS-232C bidirectional communication and LAN transmission are also supported.

The IDK NJR-01UHD can be used with other IP-NINJAR products. Combined with the NJR-R04HD, 4K@60 signals that is sent from the NJR-T01UHD can be divided into four full HD signals and be displayed on sink devices.

When using the NJR-T04HD and the NJR-R01UHD together, four ports’ full HD signals that is sent from the NJR-T04HD can be displayed as 4K@60 signals on a sink device.

Please use this product with a combination of IP-NINJAR series transmitters and receivers. It cannot be connected to OPF series units or FDX.

Input

Video
  • 1 Input
    • HDMI Deep Color (*1) / DVI 1.0
    • TMDS single link
    • HDCP 1.4 / 2.2
    • HDR (*2)
    • EDID Emulation
    • Connector: Female HDMI Type A (19-pin) (*3)
  • VGA, SVGA, XGA, WXGA(1280×768), WXGA(1280×800), Quad-VGA, SXGA, WXGA(1360×768), WXGA(1366×768), SXGA+, WXGA+, WXGA++, UXGA, WSXGA+, VESA1080, WUXGA, QWXGA, 4K (*4)
  • 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 4K (*4)
  • Color depth: 24, 30, and 36 bit deep color (*5)
  • Dot clock: 25 MHz to 600 MHz
  • TMDS clock: 25 MHz to 300 MHz
  • TMDS data rate: 0.75 Gbps to 18 Gbps
Audio
  • 1 Input
    • Multi-channel linear PCM up to 8 channels
    • Sampling frequency: 32 kHz to 192 kHz
    • Sample bit: 16 bit to 24 bit
    • Reference level: -20 dBFS
    • Max input level: 0 dBFS
    • Connectors: Female HDMI Type A (19-pin)
  • 1 Input
    • Stereo LR balanced / unbalanced signal
    • Input impedance: 48 kΩ balanced / 24 kΩ unbalanced
    • Reference level: -10 dBu
    • Max input level: +10 dBu
    • Connector: Terminal block (5-pin)

Output

Video
  • 1 Output
    • Connector:  LC (duplex fiber)
  • 1 Output * for monitoring input signals
    • HDMI Deep Color (*1) / DVI 1.0
    • TMDS single link
    • HDCP 1.4 / 2.2
    • HDR (*2)
    • Connector: Female HDMI Type A (19-pin) (*3)
  • VGA, SVGA, XGA, WXGA(1280×768), WXGA(1280×800), Quad-VGA, SXGA, WXGA(1360×768), WXGA(1366×768), SXGA+, WXGA+, WXGA++, UXGA, WSXGA+, VESA1080, WUXGA, QWXGA, 4K (*4)
  • 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 4K (*4)
  • Color depth: 24, 30, and 36 bit deep color (*5)
  • Dot clock: 25 MHz to 600 MHz
  • TMDS clock: 25 MHz to 300 MHz
  • TMDS data rate: 0.75 Gbps to 18 Gbps
Audio
  • 1 Output
    • Digital Audio
      • Multi-channel linear PCM up to 8 channels
      • Sampling frequency: 32 kHz to 192 kHz
      • Sample bit: 16 bit to 24 bit
      • Reference level: -20 dBFS
      • Max input level: 0 dBFS
    • Analog Auido
      • Stereo LR balanced / unbalanced signal
      • Output impedance: 100 Ω balanced / 50 Ω unbalanced
      • Reference level: -10 dBu
      • Max output level: +10 dBu
    • Connector: LC (duplex fiber)
  • 1 Output
    • Stereo LR balanced / unbalanced signal
    • Output impedance: 100 Ω balanced / 50 Ω unbalanced
    • Reference level: -10 dBu
    • Max output level: +10 dBu
    • Connector: Terminal block (5-pin)

Misc

Fiber Optic Cable
  • Duplex fiber cable, SFP+ module (2 LC connectors)
  • SFP+ for Multimode: PC (recommended)
  • SFP+ for Singlemode: UPC (recommended), SPC supported, APC is NOT supported
  • Multimode fiber (OM3): up to 984 ft. / 300 m
  • Singlemode fiber (OS1): up to 6.21 miles / 10 km
  • Singlemode fiber (OS1): up to 24.85 miles / 40 km (optional)(*7)
External Control
  • 1 Port (full duplex up to 115.2kbps)
  • Connector: Male D-Sub (9-pin)
  • 1 Port
  •  10Base-T, 100Base-TX , 1000Base-TX (Auto neg.), Auto MDI/MDI-X
  • Connector: RJ-45
Other Info
  • AC adapter
    • Input: 100-240 VAC ± 10 %, 50 Hz / 60 Hz ± 3 Hz
    • Output: 12 VDC 3 A (A dedicated AC adapter is provided)
  • Power consumption: About 18 watts
  • Dimensions: 8.3″ x 1.2″ x 5.5″ / 210 mm (W) x 30 mm (H) x 140 mm (D)
  • Rack size: EIA thin high, half rack wide
  • Weight: 2.20 lbs. / 1.0 kg
  • Temperature
    • Operating: 32 °F to 104 °F / 0 °C to +40 °C
    • Storage: -4 °F to +176 °F / -20 °C to +80 °C
    • Humidity: Operating / Storage 20 % to 90 % (non-condensing)
  • (*1) x.v.Color, 3D, HEC, ARC, and CEC are not supported.
  • (*2) HDR is supported if the connected sink device supports HDR and its copied EDID is set for EDID setting.
  • (*3) Use 16.4 ft. (5 m) or shorter HDMI cables.
  • (*4) Supported 4K formats: 24 Hz / 25 Hz / 30 Hz / 50 Hz (4:4:4) / 59.94 Hz (4:4:4) / 60 Hz 4:4:4
  • (*5) Supported 4K format: only 24 bit
  • (*6) We do not recommend other polishing methods, because it increases the return loss.
  • (*7) The maximum extension distance is measured under the following conditions: Fiber that is polished by a recommended method is used, there is no interconnection, and the allowable bending radius is not exceeded.
IP-NINJAR_Diagram