The IDK NJR-W01UHD is a Point-to-Point or an over IP solution for high definition signal extension via fiber optic cables. The NJR-W01UHD is featured model of IP-NINJAR series for event/staging market needs having rugged chassis and connectors. This 4K solution leverages Point-to-Point signal extension or 10 Gb Ethernet switches and enables signal management of 4K@ 60 (4:4:4) signals with zero frame latency. RS-232C bidirectional communication and LAN transmission are also supported.
The IDK NJR-W01UHD can be used with other IP-NINJAR products. Combined with the NJR-R04HD, 4K@60 signals that are sent from the NJR-TW01UHD can be divided into four full HD signals and be displayed on sink devices.
When using the NJR-T04HD and the NJR-RW01UHD together, four ports’ full HD signals that is sent from the NJR-T04HD can be displayed as 4K@60 signals on a sink device.
Please use this product with a combination of IP-NINJAR series transmitters and receivers. It cannot be connected to OPF series units or FDX.
Input
Video
- 1 Input
- HDMI Deep Color (*1) / DVI 1.0
- TMDS single link
- HDCP 1.4 / 2.2
- HDR (*2)
- EDID Emulation
- Connector: Female HDMI Type A (19-pin) Neutrik (*3)
- VGA, SVGA, XGA, WXGA(1280×768), WXGA(1280×800), Quad-VGA, SXGA, WXGA(1360×768), WXGA(1366×768), SXGA+, WXGA+, WXGA++, UXGA, WSXGA+, VESA1080, WUXGA, QWXGA, 4K (*4)
- 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 4K (*4)
- Color depth: 24, 30, and 36 bit deep color (*5)
- Dot clock: 25 MHz to 600 MHz
- TMDS clock: 25 MHz to 300 MHz
- TMDS data rate: 0.75 Gbps to 18 Gbps
Audio
- 1 Input
- Multi-channel linear PCM up to 8 channels
- Sampling frequency: 32 kHz to 192 kHz
- Sample bit: 16 bit to 24 bit
- Reference level: -20 dBFS
- Max input level: 0 dBFS
- Connectors: Female HDMI Type A (19-pin) Neutrik
Output
Video
- 1 Output
- Connector: LC (Opticalcon Duo Series Neutrik)
- 1 Output * for monitoring input signals
- HDMI Deep Color (*1) / DVI 1.0
- TMDS single link
- HDCP 1.4 / 2.2
- HDR (*2)
- Connector: Female HDMI Type A (19-pin) Neutrik (*3)
- VGA, SVGA, XGA, WXGA(1280×768), WXGA(1280×800), Quad-VGA, SXGA, WXGA(1360×768), WXGA(1366×768), SXGA+, WXGA+, WXGA++, UXGA, WSXGA+, VESA1080, WUXGA, QWXGA, 4K (*4)
- 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 4K (*4)
- Color depth: 24, 30, and 36 bit deep color (*5)
- Dot clock: 25 MHz to 600 MHz
- TMDS clock: 25 MHz to 300 MHz
- TMDS data rate: 0.75 Gbps to 18 Gbps
Audio
- 1 Output
- Digital Audio
- Multi-channel linear PCM up to 8 channels
- Sampling frequency: 32 kHz to 192 kHz
- Sample bit: 16 bit to 24 bit
- Reference level: -20 dBFS
- Max input level: 0 dBFS
- Analog Auido
- Stereo LR balanced / unbalanced signal
- Output impedance: 100 Ω balanced / 50 Ω unbalanced
- Reference level: -10 dBu
- Max output level: +10 dBu
- Connector: LC (Opticalcon Duo Series Neutrik)
- 1 Output
- Stereo LR balanced / unbalanced signal
- Output impedance: 100 Ω balanced / 50 Ω unbalanced
- Reference level: -10 dBu
- Max output level: +10 dBu
- Connector: Male XLR (3-pin) Neutrik x 2
Misc
Fiber Optic Cable
- Multimode: PC (recommended)
- Singlemode: UPC (recommended), SPC supported, APC is NOT supported
- Multimode fiber (OM3): up to 984 ft. / 300 m
- Singlemode fiber (OS1): up to 6.21 miles / 10 km
- Singlemode fiber (OS1): up to 24.85 miles / 40 km (optional)(*7)
External Control
- 1 Port * when RS232C model is selected
- Full duplex up to 115.2kbps
- Connector: Male D-Sub (9-pin) Neutrik
- 1 Port * when LAN model is selected
- 10Base-T, 100Base-TX , 1000Base-TX (Auto neg.), Auto MDI/MDI-X
- Connector: RJ-45 (Ethercon Neutrik)
- DDC buffer
- Connection Reset
Other Info
- AC adapter
- Input: 100-240 VAC ± 10 %, 50 Hz / 60 Hz ± 3 Hz
- Connector: Powercon Neutrik
- Power consumption: About 18 watts
- Dimensions: 8.50″ x 1.73″ x 11.4″ / 216 mm (W) x 44 mm (H) x 290 mm (D)
- Rack size: Half rack wide
- Weight: 4.63 lbs. / 2.1 kg
- Temperature
- Operating: 32 °F to 104 °F / 0 °C to +40 °C
- Storage: -4 °F to +176 °F / -20 °C to +80 °C
- Humidity: Operating / Storage 20 % to 90 % (non-condensing)
- (*1) x.v.Color, 3D, HEC, ARC, and CEC are not supported.
- (*2) HDR is supported if the connected sink device supports HDR and its copied EDID is set for EDID setting.
- (*3) Use 16.4 ft. (3 m) or shorter HDMI cables.
- (*4) Supported 4K formats: 24 Hz / 25 Hz / 30 Hz / 50 Hz (4:4:4) / 59.94 Hz (4:4:4) / 60 Hz 4:4:4
- (*5) Supported 4K format: only 24 bit
- (*6) We do not recommend other polishing methods, because it increases the return loss.
- (*7) The maximum extension distance is measured under the following conditions: Fiber that is polished by a recommended method is used, there is no interconnection, and the allowable bending radius is not exceeded.
