NJR-P01UFR-R - IDK Corporation

IP-NINJAR RUGGED Chassis Receiver
NJR-P01UFR-R

Coming Soon!!

Rugged Chassis

4K@60 (4:4:4) & KVM SWITCHING

Transmit signal over 10GbE

MULTIVIEWER & VIDEOWALL

Zero Frame Latency

The NJR-P01UFR is an AV over IP solution for high definition signal transmission via fiber optic cables. This IP-NINJAR model employs Neutrik’s robust connector and rugged chassis to accommodate event/staging market needs. This 4K solution leverages 10 Gb Ethernet switches and enables signal management of 4K@60 (4:4:4) signals with zero frame latency. LAN transmission is also supported. The NJR-P01UFR can be used with other IP-NINJAR products.

Input

Video

10G Ethernet

Video Formats

VGA / SVGA / XGA / WXGA (1280×768) / WXGA (1280×800) / Quad-VGA / SXGA / WXGA (1360×768) / WXGA (1366×768) / SXGA+ / WXGA+ / WXGA++ / UXGA / WSXGA+ / VESAHD / WUXGA / QWXGA / 4K
480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K
- For 4K formats, 24 Hz/25 Hz/30 Hz/50 Hz (4:4:4)/60 Hz (4:4:4) are supported.
Color depth: 24 bit, 30 bit, 36 bit Deep Color
- For 4K formats: only 24 bit
Dot clock: 25 MHz to 600 MHz
TMDS clock: 25 MHz to 300 MHz
TMDS data rate: 0.75 Gbps to 18 Gbps

Output

Video

HDMI

Video Formats

VGA / SVGA / XGA / WXGA (1280×768) / WXGA (1280×800) / Quad-VGA / SXGA / WXGA (1360×768) / WXGA (1366×768) / SXGA+ / WXGA+ / WXGA++ / UXGA / WSXGA+ / VESAHD / WUXGA / QWXGA / 4K
480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K
- For 4K formats, 24 Hz/25 Hz/30 Hz/50 Hz (4:4:4)/60 Hz (4:4:4) are supported.
Color depth: 24 bit, 30 bit, 36 bit Deep Color
- For 4K formats: only 24 bit
Dot clock: 25 MHz to 600 MHz
TMDS clock: 25 MHz to 300 MHz
TMDS data rate: 0.75 Gbps to 18 Gbps

Audio

Digital Audio

Others

(*1) HDR is supported if the connected sink device supports HDR and its copied EDID is set for EDID setting.
(*2) The maximum transmission distance is measured under the following conditions: Fiber that is polished by a recommended method is used; there is no interconnection; it does not exceed the allowable bending radius.
(*3) For digital systems, some problems, such as an HDCP authentication error, can often be recovered by physically disconnecting and reconnecting the digital cables. However, the Connection Reset feature will fix these problems automatically without the need to physically plug and unplug the cables. It creates the same condition as if the cable were physically disconnected and reconnected. This feature only works for the NJR-P’s output. If other devices are connected between the NJR-P’s output and sink device, this feature may be invalid.